click to enlarge

400 Metre Athletics Track Line Marking

We provide 400 Metre Athletics Track Line Marking services across the UK. Please Contact us for a no-obligation quote.

400m (437yds)

TRACK LENGTH: Based on parallels of 84.39m (92.29yds) and a radius of 36.5m (39.92yds) marking the two turns. The measurement is taken from 30cm (11.8in) from the inner edge for lane 1 if there is a raised border or 20cm (7.87in) if there is no border. All other lane distances are measured 20cm (7.87in) from the white line. 

LANE WIDTH: 1.22m (1.33yds) wide and no more than 1.25m (1.37yds). When the inner edge is a chalk line: lane 1 measures 1.12m (1.22yds). The measurement being taken from the outside edge of one marking line to the outside edge of the next line, going outwards from the track side of the inner kerb. All semicircular curves will be equal. 

STAGGERS: Lanes 2-8 measurements are taken along a 20cm (7.87in) line from inside edge of each lane. On the diagram, the staggers for 100m (109.36yds) and 300m (328.08yds) apply only when the straights are 84.39m (92.29yds) and must be adjusted for tracks of other proportions.

TAKE OVER ZONES: 10m (10.94yds) before and after the take over scratch line in each lane. 

LINE WIDTH: 5cm (1.97in) wide


In International Competition the 800 metre race is run in lanes as far as their first bend, making the use of the Staggered Starts necessary, which are calculated according to I.A.A.F. Rule 161 page 108 paragraph 7 of Handbook 1985-86.